- Introduction
3G football turf offers durability, safety, and consistent playability. Proper installation ensures optimal performance and longevity. Below is a step-by-step guide to installing synthetic turf, including tools, materials, and best practices.
- Step 1: Sub-Base Preparation
Before laying the turf, inspect the sub-base (asphalt or concrete) for flatness, slope, and compaction. Ensure drainage channels are functional.
- Step 2: Positioning Turf Rolls
Locate the center point of the field and align turf rolls according to directional arrows on the packaging.
Use a crane or forklift to avoid damaging rolls.
- Step 3: Laying Shock Pads (Optional)
For enhanced shock absorption, roll out high-density pads (10-12mm thick) parallel to the baseline. Keep seams tight (<3mm gap).
- Step 4: Turf Installation
Roll out turf from the center outward, ensuring blades bend in the same direction for a uniform appearance.
Trim edges with a knife and use PET joint tapes (20-30cm wide) under seams.
- Step 5: Seaming & Gluing
Apply two-component glue evenly on joint tapes.
Press turf edges onto tapes and hammer seams for adhesion. Avoid gluing turf to the sub-base.
- Step 6: Cutting & Installing White Lines
Use a linear cutter to remove green turf for markings.
Replace with pre-cut white turf strips, securing them with joint tape and glue.
- Step 7: Infilling Silica Sand & Rubber Granules
Spread silica sand (uniform, smooth grains) using an automatic infill sprayer for even distribution.
Add rubber granules (TPE/EPDM/SBR) using the same method.
- Step 8: Final Inspection & Maintenance
Measure infill height (13-15mm) with a measurement tool.
Brush turf vertically/horizontally to lift fibers.
- Key Tools
Automatic Infill Sprayer: Ensures precise infilling.
Small Vehicle for Maintenance: For cleaning and maintaining artificial turf surfaces
Infill Measurement Tool: To measure the height and uniformity of the infills
- Conclusion
As Tottenham Hotspur FC's Official Synthetic Turf Supplier, CGT has delivered FIFA-certified installations worldwide. With expertise in FIFA-compliant materials, precise installation, and one-stop services, CGT ensures exceptional performance and long-term durability of the playing fields.
Consult CGT for customized solutions for high-end stadium projects.
